Find Camera Flexible PCB Board, Customized Camera Flexible PCB, Flex Circuit PCB on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Flexible PCB > Flexible PCB for Mobile Phone Camera

Flexible PCB for Mobile Phone Camera

Product Description

Flexible PCB for Mobile Phone Camera, Camera Flexible PCB Board

The development of the consumer electronics and communication industry is the basis of the demand growth of the FPC flexible circuit board. Demand for lightweight products such as mobile phones and tablets has led to an increase in FPC market space. FPC is a flexible printed circuit board. In the evolution of intelligent and lightweight mobile electronic products, FPC has been widely used because of its advantages of high density, lightweight, thin thickness, bending resistance, flexible structure and high-temperature resistance. The application structure of PCB products has changed accordingly. The proportion of flexible circuit boards, HDI PCB and packaging substrates with high technology content is gradually increasing.

Camera Flexible PCB Board

The printed circuit board is the basic component of the smartphone. Taking FPC as an example, it can be used in various parts of mobile phones, such as display driver, touch screen, vibrator, camera, etc. The average use of FPC for a single smartphone can reach 10-15 pieces. In recent years, with the popularity of smartphones, the demand for FPC has steadily increased. At the same time, the demand for functional integration of smartphones is growing. More functional modules make the average number of FPC required by a single smartphone increasing.

Partial Flexible PCB in Smart Phone

Flexible PCB is widely used in mobile phones, especially smartphones. It can be divided into FPC for camera, FPC for module, FPC for battery, FPC for capacitive screen, FPC for keypad, FPC for antenna, etc.

A large number of flexible circuit boards are used in smartphones

As Apple continues to introduce new models of mobile phones, the use of FPC on a single machine is also increasing. The increase in FPC usage in Apple products can not only directly provide a large number of orders to FPC suppliers, but also stimulate the input of Android manufacturers. With the increasingly powerful functions of smartphones, their innovative points are decreasing and shipments are also decreasing. Foldability will be one of the important elements to generate new demand for mobile phones in the future. At present, Huawei, Samsung, and other manufacturers are actively developing foldable mobile phones. However, it is not enough to fold a mobile phone only with a foldable screen, and foldable internal components are also one of the necessary conditions, of which the foldable printed circuit board is the most important. FPC flexible circuit board as the core component will usher in new development opportunities. In the future, we are expected to see more and more FPCs appearing in various brands of intelligent terminals, thus driving the growth of the entire FPC industry chain.

Characteristics of Flexible Circuit Board


1. Shorten assembly time

2. Less volume than Rigid PCB


It can effectively reduce the volume of the product and make it more convenient to carry.

3. Weight lighter than Rigid PCB

It can reduce the weight of the final product.

4. Thickness is thinner than rigid PCB

It can improve the assembly ability in limited space.

Advantages of Flexible Circuit Board


Flexible printed circuit boards are printed circuits made of flexible insulating substrates, which have many advantages that Rigid printed circuit boards do not have.

1. Free bending, winding and folding, arbitrary arrangement according to space layout requirements, and arbitrary movement and expansion in three-dimensional space, so as to achieve the integration of component assembly and wire connection;

2. The volume and weight of electronic products can be greatly reduced by using FPC, which is suitable for the development of electronic products in the direction of high density, miniaturization, and high reliability. Therefore, FPC has been widely used in aerospace, military, mobile communications, laptop computers, computer peripherals, PDA, digital cameras and other fields or products.

3. FPC also has the advantages of good heat dissipation and weldability, easy assembly and low comprehensive cost. The design of soft-hard combination also makes up for the slight deficiency of flexible substrates in component bearing capacity to a certain extent.

Main raw materials of FPC


Its main raw materials are right: 1, base material, 2, covering film, 3, reinforcing, 4, other auxiliary materials.

1. Substrate

1.1 Rubber Substrate

There are three main parts of adhesive base material: copper foil, glue, and PI. There are two kinds of single-sided base material and double-sided base material. Only one side of copper foil is single-sided base material, and two sides of copper foil are double-sided base material.

1.2 Rubber-free Substrate

The non-glue base material is the base material without the glue layer. Compared with ordinary glue base material, it has less middle glue layer, only copper foil, and PI. It has thinner, better dimensional stability, higher heat resistance, higher bending resistance, better chemical resistance, and other advantages than glue base material. Now it has been widely used.

Copper foil: At present, the thickness of common copper foil has the following specifications: 1OZ, 1/2OZ, 1/3OZ. Now, the thinner copper foil with 1/4OZ thickness is introduced. But at present, this kind of material has been used in our country and is being used in the ultra-fine line (line width and line spacing are below 0.05MM). With the increasing requirements of customers, this kind of material will be widely used in the future.

2. Covering film

There are three main parts: release paper, glue, and PI, which are only glue and PI in the final product. The release paper will be torn off in the production process and will no longer be used (there is foreign body on its protective glue).

3, reinforce

For the specific use of FPC materials, use in a specific part of the product to increase the support strength, make up for the FPC more "soft" characteristics.

At present, there are several kinds of commonly used reinforcing materials as follows:

1) FR4 reinforcing: The main components are glass fiber cloth and epoxy resin, which are the same as FR4 used in PCB.

2) Reinforcement of steel sheet: Composition of steel, with strong hardness and support strength;

3) PI reinforcing: The same as the covering film, there are three parts of PI and glued paper, but the PI layer is thicker, which can be produced proportionally from 2MIL to 9MIL.

4.Other auxiliary materials

1) Pure glue: This adhesive film is a kind of heat-curable acrylate adhesive film, which consists of protective paper/release film and a layer of glue. It is mainly used for laminating board, soft-hard bonding board and FR-4/steel sheet reinforcing board.

2) Electromagnetic protective film: paste on the surface of the board to shield.

3) Pure copper foil: only copper foil, mainly used for hollow board production.

Type of FPC

There are six types of FPC:


A. Single-sided Flexible Circuit Board: Only one side has a circuit.

B. Double-sided flexible PCB: There are circuits on both sides.

C. Hollow-out Flexible PCB board: also known as window board.

D. Layered Flexible PCB board: two-sided circuits (separate).

E. Multilayer Flexible PCB board: two or more layers.

F. Rigid-Flexible PCB: Products Combining Flexible PCB with Rigid PCB.



At present, we are the main supplier of flexible circuit boards for smart wearing equipment. In addition, we also produce flexible circuit boards for 5G base stations, high-frequency PCB, high-speed PCB, radio frequency PCB, high-precision PCBs and Flexible Circuit Board Assembly services.


Prototype Flexible PCB Fanufacturer

PCB Factory TourPCB Factory Tour


Flexible PCB Manufacturing Capability

Learn more about JHY PCB by exploring the manufacturing capability of Flexible PCB below. We can do more than you can imagine.

Items Manufacturing Capability
PCB Layers 1 - 8layers
Laminate DuPont PI, Shengyi PI
Maximum PCB Size(Length x Width) Single Sided PCB 480*4000mm
Double Sided PCB 480*1800mm
Multilayers 236*600mm
Minimum Board Thickness Single Sided PCB 0.05mm+/-0.02mm
Double Sided PCB 0.08mm+/-0.02mm
Multilayers As per Gerber
Finished Board Thickness 1-6L 0.05mm-0.6mm
8L 1.6mm
Min Tracing/Spacing Copper Thickness 1/3 oz: 0.076mm/0.076mm (1-6L)
0.05mm/0.05mm (8L)
Copper Thickness 1/2 oz: 0.076mm/0.076mm (1-6L)
0.06mm/0.06mm (8L)
Copper Thickness 1oz: 0.1mm/0.1mm (1-6L)
0.065mm/0.065mm (8L)
Min. Annular Ring 4mil
Minimum Hole Size 1-6L 0.2mm(8mil) (CNC)
8L 0.15mm(CNC)
Solder Mask Color Green, White, Blue, Black, Red, Yellow
Solder-stop coating---Coverlay PI and PET film
Silkscreen Color White, Black, Yellow
Surface Finish OSP
e HASL
ENIG(Electroless NickLead-Freeion Gold) Ni thickness:2-6um
Au thickness:0.025-0.05um
Flash Gold Ni thickness:2-8um
Au thickness:0.025-0.15um
Immersion Tin Tin thickness:0.5-1um
PlatingTin Tin thickness:1-10um
Laser cuPunching
Special technologies Peelable solder mask
Gold fingers
Stiffener (only for PI/FR4 substrate)
Impedance Control+/-10%
Rigid Flex PCB


PCB Shipment

JHY PCB offers flexible shipping methods for our customers, you may choose from one of the methods below.

Shipment

Shipping Process
After production and testing, your PCB orders will be sent to our shipping department. As the quick turn PCB manufacturer, JHY PCB shipping department will ship your PCB quickly without any pending.


JHY PCB 's Packing Way

  • Use one professional PCB vacuum bag, with desiccant inside. Vacuum compressed totally.
  • Paste label and RoHs mark. Use second vacuum bag to protect boards again, vacuum compressed, make sure no exception.
  • Microsection report and Tin testing board are put together with PCB in cartons.COC (Certificate of Conformity) will be sent to customer by email in PDF.
  • Several layers of thick EPE(Expand aple poly ephylene) are filled fully in gaps between PCBs and cartons. Thickness of 1 layer EPE is 10mm.
  • Neutral Packing is adopted if no special requirements. Strong and thick cartons(Thickness:10mm,7 layers). Different sizes of cartons are designed to meet demand of different PCB size. All package are within weight limit of cartons. For mass production order, no exceed 21kg per carton normally.
  • All cartons sealed with strong adhesive tape should be sealed twice so as to make them more durable.
  • Solid PP/PET strapping is used outside of cartons.
  • Shipping mark, fragile mark and postcode label are all pasted clearly.
Whatever we do or whatever we think of is to make sure boards are shipped to customer safely and quickly.

Contact us if you need more details on Camera Flexible PCB Board. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Customized Camera Flexible PCB、Flex Circuit PCB. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Flexible PCB